Wolf Cut Hair: What It Is, Who It Suits and How to Style It

The wolf cut is wild by design.

It has short layers at the crown.
Longer pieces through the sides and back.
Movement around the face.
Texture through the ends.

It should look loose.

It should not look neglected.

That distinction matters.

A good wolf cut has shape, lift and movement. A bad one can sit flat at the crown, swell at the sides and trail into thin ends.

The haircut creates the layers.

The right products make those layers perform.

This guide explains what a wolf cut is, who it suits, what to ask your stylist and how Hairbond can solve the common problems that appear after you leave the salon.

What Is a Wolf Cut?

A wolf cut is a heavily layered hairstyle that combines the volume and softness of a shag with the longer, disconnected shape of a mullet.

The hair is normally cut shorter around the crown and face. Longer layers are left through the sides and back.

This creates:

• Height at the crown
• Movement around the face
• Choppy texture
• Lighter ends
• A deliberately untamed finish

The haircut can be short, medium or long.

It can be worn by men or women.

It can work with straight, wavy or curly hair.

The shape must be adapted to the person. Copying the same layers onto every head is not creativity. It is factory work.

Professional hair sources consistently describe the wolf cut as a modern meeting point between a shag and a mullet, with shorter crown layers, longer lengths and a choppy finish.

Wolf Cut at a Glance

Main feature: Shorter layers above longer, lighter lengths
Overall finish: Textured, loose and full of movement
Best hair types: Wavy, curly, thick or naturally textured hair
Can straight hair wear it? Yes, with good layering and root lift
Can fine hair wear it? Yes, if the ends are not over-thinned
Typical fringe: Curtain bangs, wispy fringe or short choppy bangs
Maintenance level: Medium
Best Hairbond products: Wonder Primer, Sea Salt Spray, Distorter Clay, Super Fibre and Shaper Toffee

Why Is It Called a Wolf Cut?

The name comes from the wild, uneven shape.

The shorter crown layers create volume around the top of the head. The longer pieces fall around the neck. The finished silhouette is meant to resemble an untamed mane.

The name is dramatic.

The basic haircut is not complicated.

It is controlled layering.

The problem begins when people mistake “wild” for “cut without a plan.”

A proper wolf cut still needs balance.

The crown must connect to the sides. The fringe must suit the face. The ends must remain healthy enough to hold a shape.

Wild hair still needs architecture.

Is the Wolf Cut Still Popular in 2026?

Yes. The wolf cut remains an important haircut in 2026, although many current versions are softer and more wearable than the extreme viral cuts seen online.

Current styles include:

• Soft wolf cuts
• Curly wolf cuts
• Short wolf cuts
• Wolf-cut bobs
• Long layered wolf cuts
• Micro wolf cuts
• Wolf cuts with curtain bangs
• More structured 1990s-inspired versions

Recent 2026 coverage from Vogue, Allure and Who What Wear continues to feature the wolf cut as a current, adaptable style rather than a finished social-media fad.

That does not mean everyone should ask for the most extreme version.

A trend gets attention.

A tailored haircut gets worn.

Who Does the Wolf Cut Suit?

The wolf cut suits people who want movement rather than a smooth, solid shape.

It is particularly useful when hair feels:

• Heavy
• Flat
• Lifeless
• Too uniform
• Difficult to shape
• Short of movement

The layers remove weight and create space between sections.

That can transform thick hair.

It can also destroy fine hair when the cutting is too aggressive.

The stylist must understand what the hair can afford to lose.

Does a Wolf Cut Suit Straight Hair?

Yes. Straight hair can wear a wolf cut, but it often needs styling help to reveal the layers and create volume at the crown.

Straight hair can show the precision of the cut well.

Every layer becomes visible.

That is both an advantage and a warning.

Poorly connected layers may look like steps. Over-thinned ends may appear weak. A flat crown can make the entire style hang downward.

For straight hair, ask for:

• Crown layers that create lift
• Face-framing sections
• Softly broken ends
• Enough weight through the perimeter
• A fringe that works with the natural parting

Hairbond Sea Salt Spray is the main solution when straight wolf-cut hair lacks movement.

Apply it to damp hair. Lift the roots while drying. Twist or scrunch sections through the lengths.

This gives the cut something to work with.

A layered haircut without texture can look unfinished.

Does a Wolf Cut Suit Wavy Hair?

Wavy hair is ideal for a wolf cut.

The natural bend exposes the layers. It gives the ends movement. It creates the loose finish the haircut is designed to produce.

The danger is frizz.

Wavy hair may expand around the sides while sitting flat at the crown. This creates width in the wrong place.

The answer is not to cover the entire head in wax.

Prepare the hair first.

Use Hairbond Wonder Primer through damp hair to improve manageability. Add Sea Salt Spray near the roots and through selected sections. Dry while lifting the crown.

Finish only the areas that need more separation.

Good styling directs the texture.

It does not drown it.

Does a Wolf Cut Suit Curly Hair?

Yes. A curly wolf cut uses layers to release the natural curl pattern and create shape around the crown, face and shoulders.

Curly hair must be cut with shrinkage in mind.

Wet curls appear longer. They rise as they dry. A fringe cut too short can end several floors above its intended address.

Ask the stylist to consider:

• Curl pattern
• Shrinkage
• Density
• Weight distribution
• How the curls behave when dry
• Which areas become wider
• Which areas collapse

A curly wolf cut should not be cut as though the hair were straight.

The layers need to release curls without removing so much weight that the ends become thin and uncontrolled.

Use Wonder Primer when the curls need easier handling.

Dry with a diffuser.

Use a small amount of Distorter Clay only on selected ends when greater separation is required.

Do not rake heavy clay through every curl.

Curly hair needs freedom.

That is rather the point.

Can Fine Hair Have a Wolf Cut?

Fine hair can have a wolf cut.

It needs restraint.

The classic wolf cut uses many layers. Fine hair does not always have enough density to support them.

Too many short layers can expose the scalp.

Too much thinning can leave the ends transparent.

A better fine-hair wolf cut uses:

• Fewer layers
• Softer disconnection
• A fuller perimeter
• Moderate crown lift
• Light face framing
• A fringe that does not steal too much density

The right product also matters.

Heavy oils and shiny waxes can clump fine strands together. That can make the hair appear thinner.

Hairbond Sea Salt Spray helps create lift before drying.

A tiny amount of Hairbond Super Fibre can then add texture and control without relying on a wet, greasy finish. Hairbond positions Super Fibre as a stronger-control product that helps create matte texture without the heavy shine that can expose thinner areas.

Fine hair does not need more product.

It needs less product used with more intelligence.

Can Thick Hair Have a Wolf Cut?

Thick hair is well suited to the wolf cut.

The layers remove weight and stop the hair sitting in one solid mass.

However, thick hair can expand.

If too much short layering is added around the crown and sides, the style may become wider than intended.

Ask the stylist to remove internal weight while keeping the outside shape controlled.

Hairbond Distorter Clay works well when thick wolf-cut hair needs separation without a polished or stiff finish.

Apply a small amount through the ends and shorter layers.

Keep most of it away from the roots.

Thick hair already has weight.

There is no prize for adding more.

Which Face Shapes Suit a Wolf Cut?

A wolf cut can be adjusted to most face shapes.

The position of the shortest layers matters more than the name of the haircut.

Wolf Cut for a Round Face

A round face normally benefits from height at the crown and longer layers around the cheeks.

Avoid building too much width at the sides.

Ask for:

• Lift through the centre
• Longer face-framing layers
• A curtain fringe that opens the face
• Less volume directly beside the cheeks

The aim is to create length and movement.

Not a perfect circle with excellent hair.

Wolf Cut for an Oval Face

An oval face can carry most wolf-cut variations.

The main concern is proportion.

Very high crown volume may make the face look longer. Heavy curtains can hide too much of a naturally balanced shape.

Keep the cut open and flexible.

Wolf Cut for a Square Face

Soft, broken layers can balance a strong jaw.

Curtain bangs and face-framing pieces can soften the outline.

Avoid making the crown and fringe too boxy.

The cut should move.

A rigid wolf cut is a contradiction wearing scissors.

Wolf Cut for a Long Face

Avoid excessive height at the crown.

Create more width through the sides and keep a fuller fringe.

A wispy or curtain fringe can reduce the visible length of the face.

Long, flat sections around the cheeks may make the face appear even longer.

Wolf Cut for a Heart-Shaped Face

A heart-shaped face often suits curtain bangs and layers that begin near the cheekbones or jaw.

Keep some fullness through the lower sections.

Too much crown volume with very thin ends can exaggerate the difference between a wider forehead and narrower chin.

What Should You Ask Your Hairdresser For?

Do not ask only for “a wolf cut.”

That leaves too much open to interpretation.

One stylist may picture a soft shag.

Another may picture a full mullet.

A third may have watched half a video on TikTok and now feels dangerous.

Show clear reference photographs.

Choose images with hair similar to your own:

• Similar thickness
• Similar curl pattern
• Similar length
• Similar density
• Similar natural volume

Then say:

“I want a wolf cut with shorter layers through the crown, face-framing sections and longer movement through the sides and back. I want texture, but I do not want the ends thinned out too much. Please keep enough weight so it still looks full.”

Also explain:

• How much styling you will do
• Whether you use a hairdryer
• Whether your hair becomes frizzy
• Whether you wear it naturally curly
• Whether you want a strong mullet shape
• Whether you want a soft, wearable version
• How short you are willing to take the fringe

Be honest.

Do not request a haircut that needs 25 minutes of styling and then announce that you “just let it dry.”

The stylist cannot negotiate with physics.

The Best Wolf Cut Variations

1. Soft Wolf Cut

The soft wolf cut uses blended layers and a gentle change between short and long sections.

It is less dramatic than the viral version.

It works well for people who want movement without looking as though they have joined an unsuccessful glam-rock band.

A soft wolf cut suits:

• First-time wolf-cut customers
• Professional settings
• Fine or medium hair
• Longer hair
• People growing out a fringe

Use Wonder Primer before drying.

Finish with a small amount of Shaper Toffee through the longer sections when the style needs smoother control.

2. Short Wolf Cut

A short wolf cut sits around the ears, jaw or neck.

It has strong crown texture and lighter edges.

This version can resemble a shaggy crop, a bixie or a short mullet, depending on the perimeter.

Short wolf cuts often need more frequent shaping.

Use Sea Salt Spray for lift.

Use Distorter Clay to separate the shorter sections.

3. Medium Wolf Cut

The medium wolf cut normally sits between the jaw and shoulders.

This is one of the most adaptable lengths.

It provides enough hair for movement without the weight of a long cut.

It can be worn:

• Straight
• Wavy
• Curly
• With curtain bangs
• With a full fringe
• With no fringe

This length often needs preparation more than strong Hairbond’s Distorter Professional Hair Clay 100ml is the perfect product for you. This lightweight clay provides a medium hold.

Start with Wonder Primer and Sea Salt Spray.

Finish only where necessary.

4. Long Wolf Cut

A long wolf cut keeps the overall length while placing shorter layers around the crown and face.

It offers movement without demanding a dramatic loss of length.

The challenge is weight.

Long hair can pull the crown flat.

Use Sea Salt Spray near the roots before drying.

Apply Shaper Toffee or a tiny amount of Distorter through the ends for definition.

Do not coat the full length in clay.

That would turn movement into admin.

5. Curly Wolf Cut

The curly wolf cut allows natural curls to form the shape.

The crown is lifted. The face is framed. The lower lengths remain lighter and freer.

Use Wonder Primer as the preparation stage.

Diffuse the hair.

Separate selected curls with clean fingers.

Add only a trace of Distorter where the layers disappear into one another.

6. Straight Wolf Cut

The straight wolf cut displays sharp, visible layers.

It can look bold and graphic.

It can also look flat if the roots have no lift.

Sea Salt Spray is the key Hairbond solution here.

Use it before drying. Direct the shorter crown layers upward and outward. Twist longer sections around the fingers.

Finish with Distorter for a broken matte texture.

7. Wolf Cut With Curtain Bangs

Curtain bangs open through the middle and sweep around the face.

They soften the front of the wolf cut and help connect the crown layers to the longer sides.

Use Wonder Primer before drying the fringe.

Direct each side away from the face with a brush or fingers.

Use a trace of Shaper Toffee on the ends when the fringe needs smooth control.

8. Wolf Cut With a Full Fringe

A full fringe creates a heavier, more dramatic front.

It works well on longer or oval faces.

The fringe must be balanced against the crown. If both are too heavy, the style can close around the face.

Use product sparingly.

A fringe coated in wax separates into greasy sections.

Nobody ordered barcode bangs.

9. Men’s Wolf Cut

The men’s wolf cut usually combines:

• A textured crown
• Longer hair around the back
• Movement over the ears
• A broken fringe
• A natural or matte finish

It may sit close to a modern mullet or shag.

For short men’s wolf cuts, use Sea Salt Spray followed by Distorter Clay.

For finer hair or a stronger shape, use Super Fibre.

For longer versions, use Wonder Primer and finish lightly with Shaper Toffee.

10. Subtle Wolf Cut

The subtle wolf cut keeps the essential crown layers but reduces the visible disconnection.

It is ideal for someone who wants more shape without looking heavily layered.

The cut grows out well.

It also gives the stylist room to make the shape stronger at a later appointment.

Caution is not cowardice.

Sometimes it is merely avoiding a six-month grow-out.

Wolf Cut Versus Shag

The wolf cut and shag are close relatives.

Both use layers, texture and movement.

A shag is normally:

• More evenly blended
• Softer around the perimeter
• Fuller through the sides
• Less disconnected
• More influenced by 1970s styling

A wolf cut is normally:

• Shorter at the crown
• Longer at the back
• More disconnected
• More dramatic
• Closer to a mullet shape

The difference can be subtle.

It depends on how strongly the short and long sections are separated.

Wolf Cut Versus Mullet

A traditional mullet has a clearer contrast between the short front and sides and the longer back.

A wolf cut blends that contrast with shag-style layers.

The mullet says:

Short here. Long there.

The wolf cut says:

Let us connect the argument.

Wolf Cut Versus Butterfly Cut

Both haircuts use layers.

The finish is different.

A butterfly cut normally has:

• Smooth, sweeping layers
• A polished blow-dried finish
• Fuller longer lengths
• Soft face framing
• Less visible disconnection

A wolf cut normally has:

• Choppier layers
• More crown texture
• Lighter ends
• A messier finish
• Greater separation between lengths

The butterfly cut is polished movement.

The wolf cut is controlled rebellion.

How to Style a Wolf Cut

The wolf cut needs three things:

Volume.
Movement.
Separation.

The order matters.

Trying to create all three with a fistful of wax at the end is why some layered cuts look dirty instead of styled.

Step 1: Start With Damp Hair

Wash or dampen the hair.

Remove excess water with a towel.

Press and squeeze.

Do not rub the hair into a furious ball.

Rough towel drying can increase tangling and frizz, especially on longer, wavy or curly hair.

Step 2: Prepare With Hairbond Wonder Primer

Wonder Primer is the solution when wolf-cut hair feels:

• Dry
• Tangled
• Frizzy
• Difficult to comb
• Hard to direct
• Heavy after styling products

Apply it lightly through damp hair.

Concentrate on the mid-lengths and ends.

Use less near the roots, particularly on fine hair.

Hairbond describes Wonder Primer as a lightweight daily preparation product designed to support manageability without the heavy or greasy feel of richer creams and oils.

Primer does not create the final wolf cut.

It makes the hair easier to work with.

That is the foundation.

Step 3: Create Lift With Hairbond Sea Salt Spray

Sea Salt Spray is the solution when the wolf cut:

• Falls flat at the crown
• Has invisible layers
• Looks too smooth
• Lacks natural movement
• Needs stronger waves
• Collapses after drying

Spray it lightly near the crown and through selected lengths.

Do not soak the hair.

Hairbond Sea Salt Spray is intended to build volume, texture and natural wave across different hair types.

Lift the shorter layers while drying.

Scrunch wavy or curly hair.

Twist straight sections around your fingers.

The product creates grip.

The dryer creates shape.

Step 4: Dry the Crown First

The crown is the engine of the wolf cut.

If it sits flat, the longer sections can look thin and disconnected.

Lift the roots with your fingers or a vented brush.

Dry against the natural direction first.

Then guide the hair back into its intended shape.

For curly hair, use a diffuser and controlled heat.

For straight hair, direct the shorter layers upward and outward.

For curtain bangs, dry each side away from the face.

Do not spend ten minutes polishing the ends while the crown lies down like a tired spaniel.

Start where the shape begins.

Step 5: Choose the Correct Finishing Product

The correct finisher depends on the problem.

Not the haircut name.

Use Hairbond Distorter Clay for Choppy Texture

Distorter is the solution when the wolf cut needs:

• Visible separation
• A matte finish
• Choppy ends
• More definition
• Flexible control
• A less polished appearance

Hairbond Distorter Clay provides medium hold with flexibility and natural movement rather than the rigid finish associated with heavy gels.

Use a small amount.

Warm it fully between the hands.

Apply it to dry hair.

Pinch selected layers and ends.

Do not drag a thick layer through the entire head.

The goal is separation.

Not product archaeology.

Use Hairbond Super Fibre for Stronger Shape

Super Fibre is the solution when:

• Fine hair collapses
• Short layers will not stay lifted
• The fringe loses direction
• A short wolf cut needs stronger control
• The shape disappears during the day

Use it on dry hair.

Start near the roots of the sections that require lift.

Work outward.

Super Fibre is better suited to shorter wolf cuts and men’s versions where greater structure is required.

Long hair rarely needs strong fibre from root to end.

Use it with precision.

Use Hairbond Shaper Toffee for Smoother Control

Shaper Toffee is the solution when:

• Longer layers become too fluffy
• Curtain bangs will not sit correctly
• The ends need smoother direction
• The cut needs control without becoming rigid
• Thick hair needs guidance rather than aggressive texture

Hairbond describes Shaper Toffee as offering firm but flexible hold rather than a stiff finish.

Use a small amount through the outer layers and ends.

Avoid loading it into fine roots.

Shaper controls movement.

It should not remove it.

The Hairbond Wolf Cut System

The haircut creates the layers.

Hairbond solves what happens next.

Problem: The hair tangles and becomes hard to control

Solution: Hairbond Wonder Primer

It prepares the hair and makes the longer layers easier to manage before drying.

Problem: The crown sits flat

Solution: Hairbond Sea Salt Spray

It builds grip and lift so the shorter layers become visible.

Problem: The layers blend into one solid shape

Solution: Hairbond Distorter Clay

It separates selected sections and creates a choppy matte finish.

Problem: Fine or short hair loses its shape

Solution: Hairbond Super Fibre

It adds stronger control where the roots, fringe or crown need support.

Problem: Long layers become too fluffy

Solution: Hairbond Shaper Toffee

It guides the longer pieces and controls the ends without forcing the whole style into a hard shell.

This is the point.

There is no single “wolf cut product.”

There is a set of styling problems.

Hairbond gives each problem an answer.

How Much Product Should You Use?

Start with less than you think.

Layered hair exposes bad product application.

Too much product can:

• Pull down the crown
• Make the ends look thin
• Join separate layers together
• Create greasy sections
• Remove natural movement
• Make fine hair expose more scalp

Begin with a small amount.

Apply it to the areas that need help.

Do not apply equal amounts everywhere.

Different sections have different jobs.

The crown needs lift.

The middle needs movement.

The ends need definition.

Treat them accordingly.

Can You Air-Dry a Wolf Cut?

Yes.

A wolf cut can air-dry well when the hair already has natural wave or curl.

Apply Wonder Primer to damp hair.

Add Sea Salt Spray where more lift or texture is needed.

Scrunch or twist the sections.

Allow the hair to dry without repeatedly touching it.

When dry, break up the shape gently.

Add Distorter only where the layers need more definition.

Straight hair may need a dryer to reveal the crown shape.

Air-drying straight hair can cause the layers to lie close together.

The cut is still there.

It is merely refusing to report for duty.

Common Wolf Cut Mistakes

Removing Too Much Weight

Over-thinning can leave the ends weak and transparent.

This is especially risky on fine hair.

Layers create movement.

They should not create an international shortage of hair.

Making Every Layer Too Short

Short layers can increase volume.

They can also create uncontrollable width.

The stylist must decide where volume is useful.

Ignoring the Natural Texture

A straight-hair reference photograph may not translate directly to tight curls.

The shape must respect how the hair moves and shrinks.

Choosing the Wrong Fringe

A fringe changes the entire cut.

Curtain bangs open the face.

A full fringe shortens it.

Micro bangs create a stronger, more alternative look.

Do not choose the fringe as an afterthought.

Flattening the Crown With Heavy Product

The crown should normally carry the volume.

Heavy wax at the roots defeats the cut.

Use Sea Salt Spray before drying.

Use finishing products only where necessary.

Expecting the Haircut to Style Itself

A wolf cut can be low maintenance.

It is not always no maintenance.

Straight or fine hair may need root lift.

Thick hair may need control.

Curly hair may need careful drying.

The “effortless” look has always had excellent public relations.

How Often Should You Trim a Wolf Cut?

Most wolf cuts benefit from a reshape every six to twelve weeks.

Shorter and more dramatic versions may need attention sooner.

Long, soft wolf cuts can often grow for longer because the layers blend as they develop.

Book a trim when:

• The crown becomes flat
• The fringe loses its shape
• The ends begin to look thin
• The layers become heavy
• The back starts to dominate
• The haircut has quietly become an ordinary long cut

Growth is not the enemy.

Losing the intended shape is.

Is a Wolf Cut High Maintenance?

It depends on the hair.

Naturally wavy or curly hair may fall into the shape with minimal work.

Straight, fine or very heavy hair may need more styling.

The cut becomes easier when:

• The layers suit the natural texture
• The fringe suits the growth pattern
• The crown is not overcut
• The correct products are used
• The wearer understands basic drying

A poor wolf cut is high maintenance because you spend every morning trying to correct the haircut.

A good wolf cut gives the hair a direction.

Frequently Asked Questions

What is a wolf cut?

A wolf cut is a layered hairstyle combining the crown volume of a shag with the longer, more disconnected shape of a mullet.

Is the wolf cut still in style in 2026?

Yes. Softer, curly, short, long and more structured wolf cuts remain visible in 2026 haircut coverage and salon trends.

What should I ask my hairdresser for?

Ask for shorter crown layers, face framing and longer movement through the sides and back. Explain whether you want a soft shag shape or stronger mullet-style disconnection.

Does a wolf cut work on straight hair?

Yes. Straight hair shows the layers clearly, but it may need Sea Salt Spray and blow-drying to create crown lift and movement.

Does a wolf cut work on curly hair?

Yes. The layers can release curls and create shape, but the stylist must allow for shrinkage, density and the natural curl pattern.

Can thin hair have a wolf cut?

Yes, provided the stylist uses fewer layers and keeps enough weight through the ends. Over-thinning should be avoided.

What Hairbond product is best for a wolf cut?

Use Sea Salt Spray for volume, Distorter Clay for choppy texture, Wonder Primer for preparation, Super Fibre for stronger control and Shaper Toffee for smoother longer layers.

Is a wolf cut the same as a mullet?

No. A wolf cut blends mullet-style length with softer shag layers. A traditional mullet usually has a clearer contrast between the short and long sections.

Is a wolf cut the same as a shag?

They are similar. A shag is normally softer and more blended. A wolf cut usually has greater crown volume and stronger disconnection toward the back.

Can men wear a wolf cut?

Yes. Men’s wolf cuts often resemble modern shags or textured mullets, with longer hair at the back and movement through the fringe and crown.

Do you need bangs for a wolf cut?

No. Curtain bangs and choppy fringes are common, but the haircut can be created with longer face-framing sections instead.

Is a wolf cut good for thick hair?

Yes. Layering can remove weight and create movement. The stylist must avoid adding too much width around the crown and sides.

Is a wolf cut easy to grow out?

A soft wolf cut normally grows out well. Highly disconnected or very short crown layers may require more patience and regular reshaping.

Can I style a wolf cut without heat?

Yes. Wavy and curly hair can often be air-dried with Wonder Primer and Sea Salt Spray. Straight hair may need heat to build stronger crown volume.

Final Verdict

The wolf cut works because it refuses to sit still.

The crown rises.

The layers move.

The fringe frames the face.

The ends break away from one solid shape.

But layers alone do not guarantee a good result.

The crown may fall flat.

Straight hair may lose movement.

Curly hair may become difficult to control.

Thick hair may expand.

Fine hair may collapse.

The answer is not more product.

It is the right product in the right place.

Wonder Primer prepares difficult or longer hair.

Sea Salt Spray creates root lift and movement.

Distorter Clay separates the layers.

Super Fibre supports shorter or finer sections.

Shaper Toffee controls longer pieces and softer finishes.

The stylist builds the wolf cut.

Hairbond helps you find it again the next morning.

That is where a professional styling product proves its value.

Not on the salon shelf.

On real hair.

In real weather.

With five minutes before you have to leave.